|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TLP283,TLP283-4 TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRANSISTOR TLP283,TLP283-4 PROGRAMMABLE CONTROLLERS AC adapters for PDAs/ on-board power supplies I/O interface boards TLP283 and TLP283-4 is a very small and thin coupler,suitable for surface mount assembly in applications such as on-board power supplies,programmable controllers. TLP283 and TLP283-4 consist of photo transistor,optically coupled to a gallium arsenide infrared emitting diode. Collector-Emitter Voltage Current Transfer Ratio Isolation Voltage UL Recognized : 100 V (MIN) : 100% (MIN)@IF=1mA : 2500 Vrms (MIN) : UL1577 , File No. E67349 TOSHIBA 11-3A1 Weight: 0.05 g (typ.) Unit in mm TLP283 1 Pulse delay time(Note 1) : 100us(MAX)@IF=1mA,RL=10k Note 1 : 1 Pulse delay time = tON+tOFF Pin Configuration (Top view) Unit in mm TLP283 1 2 4 3 1:ANODE 2:CATHODE 3:EMITTER 4:COLLECTOR 1 2 3 4 5 6 7 8 TLP283-4 16 15 14 13 12 11 10 9 TLP283-4 TOSHIBA 11-10F1 Weight: 0.19 g (typ.) 1,3,5,7 :ANODE 2,4,6,8 :CATHODE 9,11,13,15 :EMITTER 10,12,14,16 :COLLECTOR 1 2007-10-01 TLP283,TLP283-4 Absolute Maximum Ratings (Ta = 25) CHARACTERISTIC Forward Current Forward Current Derating LED Pulse Forward Current Reverse Voltage Junction Temperature Collector-Emitter Voltage Emitter-Collector Voltage DETECTOR Collector Current Collector Power Dissipation (1 Circuit) Collector Power Dissipation Derating(Ta25C) (1 Circuit) Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature Total Package Power Dissipation (1 Circuit) Total Package Power Dissipation Derating (Ta25C) (1 Circuit) Isolation Voltage (Note2) SYMBOL IF IF /C IFP VR Tj VCEO VECO IC PC PC /C Tj Topr Tstg Tsol PT PT /C BVS 200 -2.0 150 -1.5 125 -55~100 -55~125 260 (10s) 170 -1.7 -0.7 (Ta53C) 1 5 125 100 7 50 100 -1.0 RATING TLP283 50 -0.5 (Ta25C) TLP283-4 UNIT mA mA /C A V C V V mA mW mW /C C C C C mW mW /C Vrms 2500(AC,1min,R.H.60%) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note2) Device considered a two terminal device : LED side pins shorted together and DETECTOR side pins shorted together. Individual Electrical Characteristics (Ta = 25) CHARACTERISTIC Forward Voltage LED Reverse Current Capacitance Collector-Emitter Breakdown Voltage Emitter-Collector DETECTOR Breakdown Voltage SYMBOL VF IR CT V(BR) CEO TEST CONDITION IF = 10 mA VR = 5 V V = 0, f = 1 MHz IC = 0.5 mA MIN. 1.0 -- -- 100 TYP. 1.15 -- 30 -- MAX. 1.3 10 -- -- UNIT V A pF V V(BR) ECO IE = 0.1 mA VCE = 48 V, Ambient Light Below (100 x) VCE = 48 V, Ta = 85C Ambient Light Below (100 x) V = 0, f = 1 MHz 7 -- 0.01 (2) 2 (4) 10 -- 0.1 (10) 50 (50) -- V Collector Dark Current (Note3) Capacitance (Collector to Emitter) -- -- -- A A pF ICEO CCE (Note3) Because of the construction,leak current might be increased by ambient light. Please use photocoupler with less ambient light. 2 2007-10-01 TLP283,TLP283-4 Coupled Electrical Characteristics (Ta = 25) CHARACTERISTIC Current Transfer Ratio Saturated CTR Collector-Emitter Saturation Voltage Off-State Collector Current SYMBOL IC / IF IC / IF (sat) VCE (sat) IC (off) TEST CONDITION IF = 1 mA, VCE = 5 V IF = 1 mA, VCE = 0.4 V IC = 0.2 mA, IF = 1 mA VF = 0.7 V, VCE = 48 V MIN. 100 50 -- -- TYP. -- -- 0.2 -- MAX. 400 -- 0.4 10 UNIT % % V A Isolation Characteristics (Ta = 25) CHARACTERISTIC Capacitance (Input to Output) Isolation Resistance SYMBOL CS RS TEST CONDITION VS = 0 V, f = 1 MHz VS = 500 V, R.H.60% AC , 1 minute Isolation Voltage BVS AC , 1 second,in OIL DC , 1 minute, in OIL MIN. -- 5x10 10 TYP. 0.8 10 14 MAX. -- -- -- -- -- UNIT pF Vrms Vdc 2500 -- -- -- 5000 5000 Switching Characteristics (Ta = 25) CHARACTERISTIC Turn-On Time Turn-Off Time 1 Pulse delay time SYMBOL tON tOFF tON+ tOFF VCC = 5 V, IF = 1 mA RL = 10k TEST CONDITION MIN. -- -- -- TYP. 7.5 70 80 MAX. 20 90 100 s UNIT (Fig.1)SWITCHING TIME TEST CIRCUIT 3 2007-10-01 TLP283,TLP283-4 100 IF - Ta PC - Ta 200 80 160 TLP280 Allowable forward current IF (mA) 60 TLP280 40 TLP280-4 20 Allowable collector power Dissipation PC (mW) 120 TLP280-4 80 40 0 20 0 20 40 60 80 100 120 0 20 0 20 40 60 80 100 120 Ambient temperature Ta () Ambient temperature Ta () 3000 IFP - DR PULSE WIDTH 100s IF - V F 100 Pulse forward current IFP (mA) 500 300 (mA) Forward current IF 1000 Ta=25 10 100 75 50 25 0 25 50 100 50 30 1 10 3 10-3 3 10-2 3 10-1 3 10 0 0.1 0.6 0.8 1.0 1.2 1.4 1.6 Duty cycle ratio DR Forward voltage VF (V) 3.2 VF /Ta- IF 1000 500 IFP - VFP Forward voltage temperature coefficient VF /Ta (mV/) Pulse forward current IFP (mA) 2.8 300 100 50 30 2.4 2.0 1.6 1.2 10 5 3 1 0.6 Pulse width10s Repetitive Frequency=100Hz Ta=25 1.0 1.4 1.8 2.2 2.6 3.0 0.8 0.4 0.1 0.3 0.5 1 3 5 10 30 50 Forward current IF (mA) Pulse forward voltage VFP (V) *: The above graphs show typical characteristics. 4 2007-10-01 TLP283,TLP283-4 IC-VCE IC-VCE 15 Ta=25C IC (mA) IF=5.0mA 5 Ta=25C IC (mA) IF=5.0mA IF=4.0mA IF=3.0mA IF=4.0mA 4 3 2 10 IF=3.0mA Collector Current Collector Current IF=2.0mA 5 IF=0.5mA IF=2.0mA IF=1.0mA IF=1.0mA 1 IF=0.5mA 0 5 Collector-Emitter Voltage VCE(V) 10 0 0.2 0.4 0.6 0.8 VCE(V) 1 Collector-Emitter Voltage IC-IF ICEO - Ta 100 IC (mA) 10000 1000 100 10 1 0.1 0 20 40 60 80 Ta(C) VCE = 48V 10 Collector Current Collector Dark Current ID(ICEO)(nA) VCE = 24V VCE = 10V VCE = 5V 1 SAMPLE B SAMPLE A VCE = 5V VCE = 0.4V Ta=25C 0.1 0.1 Forward Current 1 IF(mA) 10 100 100 Ambient Temperature IC/IF-IF 1000 Current Transfer ratio IC/IF (%) VCE = 5V VCE = 0.4V Ta=25C SAMPLE B 100 SAMPLE A 10 0.1 1 Forward Current 10 IF(mA) 100 *: The above graphs show typical characteristics. 5 2007-10-01 TLP283,TLP283-4 V C E ( s a t ) - Ta I C - Ta 0.5 Collector-Emitter Saturation Voltage VCE(sat) (mA) IC=0.5mA IC=0.2mA 100 IF=1.0mA VCE = 5V 0.4 0.3 0.2 0.1 0 -40 -20 IC (mA) 10 IF= 2.0mA IF= 1.0mA Collector Current 1 IF=0.5mA 0.1 IF=0.2mA 0 20 40 60 Ta(C) 80 100 0.01 -40 -20 0 20 40 60 Ta(C) 80 100 Ambient Temperature Ambient Temperature tON/tOFF-RL t O N / t O F F - Ta 1000 IF = 1mA 1000 VCC = 5V IF = 1mA VCC = 5V RL = 10k Switching Time tON/tOFF (s) 100 tOFF Switching Time tON/tOFF (s) 100 tOFF 10 tON 10 tON 1 1 10 Load Resistance RL(k) 100 1 -40 -20 0 20 40 60 Ta(C) 80 100 Ambient Temperature *: The above graphs show typical characteristics. 6 2007-10-01 TLP283,TLP283-4 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2007-10-01 |
Price & Availability of TLP28307 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |